Notices

Mini-me Clicking Noise. Help!!

Thread Tools
 
Old Oct 18, 2005 | 06:39 PM
  #1  
ken9's Avatar
ken9
Thread Starter
Member
 
Joined: Sep 2005
Posts: 33
Likes: 0
Default Mini-me Clicking Noise. Help!!

Well, I just did a mini me into my civic. It starts, but there is a loud clicking noise coming from the motor. The more gas the louder it gets. What can be causing this? Valves adjustment? But I didn't even touch the head internals. Just slap the head on. B7 wasn't clicking before. Can it be lack of oil to the head? Bad oil pump? Any suggestions will help.
Reply
Old Oct 18, 2005 | 06:55 PM
  #2  
Omniscient's Avatar
Omniscient
warm butter on toast
 
Joined: Jan 2005
Posts: 6,485
Likes: 0
From: The boonies, CT
Default

does the ticking get more rapid when you rev it? I would say valve adjustment. Youd don't need to have to touch the valves, it just happens over time.
Reply
Old Oct 19, 2005 | 07:13 AM
  #3  
Wharbone's Avatar
Wharbone
Senior Member
 
Joined: Apr 2003
Posts: 6,157
Likes: 0
From: Dallas, TX
Default

Adjust your valves. It isn't hard at all. Check your oil level. It probably just needs a valve adjustment.
Reply
Old Oct 19, 2005 | 10:34 AM
  #4  
ken9's Avatar
ken9
Thread Starter
Member
 
Joined: Sep 2005
Posts: 33
Likes: 0
Default

alright. I try to adjust the valves. just need to find some time. By the way. Is z6 and y8 valves adjustment the same or different. If it is different can someone give the the valve lash for the z6.
Reply
Old Oct 19, 2005 | 11:11 AM
  #5  
Wharbone's Avatar
Wharbone
Senior Member
 
Joined: Apr 2003
Posts: 6,157
Likes: 0
From: Dallas, TX
Default

adjust them when your engine is cold.

For a Z6

Intake: .18-.22mm (.007-.009in)
Exhaust: .23-.27mm (.009-.011in)
Reply
Old Oct 20, 2005 | 04:46 PM
  #6  
ken9's Avatar
ken9
Thread Starter
Member
 
Joined: Sep 2005
Posts: 33
Likes: 0
Default

I figure what was causing the clickong noise. It was nothing wrong with the valves. It was the camshaft. One of the lobe of the camshaft broke so it was causing the clicking noise. I dont know how it broke but it broke. Well thanks all of you for helping out.
Reply




All times are GMT -8. The time now is 11:41 AM.