Rallying A CIVIC!
Thread Starter
Registered User
Joined: Oct 2005
Posts: 1
Likes: 0
Rallying A CIVIC!
Hey,
recently purchased a 98 Civic CX Hatchback in canada, i have access to a JDM B16A2 with tranny and ECU, only problem is its only got half a wiring harness, i was wondering if anyone knows whether i'd be better off looking for a USDM B16A2 out of a Civic SI, or is it pretty much the same as the JDM version, also are driveshafts and motor mounts on the CX capable of fitting with the B16A2???? I'm building this car up to rally in the Canadian Rally Championship P3 catagory, any info would be appreciated! thanks.
recently purchased a 98 Civic CX Hatchback in canada, i have access to a JDM B16A2 with tranny and ECU, only problem is its only got half a wiring harness, i was wondering if anyone knows whether i'd be better off looking for a USDM B16A2 out of a Civic SI, or is it pretty much the same as the JDM version, also are driveshafts and motor mounts on the CX capable of fitting with the B16A2???? I'm building this car up to rally in the Canadian Rally Championship P3 catagory, any info would be appreciated! thanks.
Honorary Moderator Alumni
Joined: Sep 1999
Posts: 8,735
Likes: 0
From: Someplace with cones=AUTO
Originally Posted by Running925
humm Rally Racing
any AWD > fwd
any AWD > fwd
Both engines are the same basically. Good luck though. I've seen a couple Civics/Honda doing rally. Not the best setup since the car is meant for economy and not abuse
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
Originally Posted by nemrallyteam
Hey,
recently purchased a 98 Civic CX Hatchback in canada, i have access to a JDM B16A2 with tranny and ECU, only problem is its only got half a wiring harness, i was wondering if anyone knows whether i'd be better off looking for a USDM B16A2 out of a Civic SI, or is it pretty much the same as the JDM version, also are driveshafts and motor mounts on the CX capable of fitting with the B16A2???? I'm building this car up to rally in the Canadian Rally Championship P3 catagory, any info would be appreciated! thanks.
recently purchased a 98 Civic CX Hatchback in canada, i have access to a JDM B16A2 with tranny and ECU, only problem is its only got half a wiring harness, i was wondering if anyone knows whether i'd be better off looking for a USDM B16A2 out of a Civic SI, or is it pretty much the same as the JDM version, also are driveshafts and motor mounts on the CX capable of fitting with the B16A2???? I'm building this car up to rally in the Canadian Rally Championship P3 catagory, any info would be appreciated! thanks.