4-2-1 dc sports header: need help
#1
Member
Thread Starter
Join Date: Jun 2005
Location: chicago,IL
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
4-2-1 dc sports header: need help
i just bought some stainless steel dc sports (4-2-1) 1 piece headers for my del sol si. I was wondering if anyone knew would the header fit on with ease or would i have to do some modifications to get it on right.
#2
Honorary Moderator Alumni
Join Date: Sep 1999
Location: Someplace with cones=AUTO
Posts: 8,735
Likes: 0
Received 0 Likes
on
0 Posts
Should just bolt right on as long as you ordered the correct header and they sent you the right one.
Typically takes about 30-60 minutes with basic hand tools. Also you will need an O2 sensor socket to get the old one off, and anti-seize compound to put on the threads, and a new exhaust manifold gasket. Make sure you put some gasket maker on too where the header meets the engine block.
Typically takes about 30-60 minutes with basic hand tools. Also you will need an O2 sensor socket to get the old one off, and anti-seize compound to put on the threads, and a new exhaust manifold gasket. Make sure you put some gasket maker on too where the header meets the engine block.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page