Will the Spoon N1 Muffler EG6/EK9 fit a 95 Civic coupe without having to make any mods?

 

Spoon sells their catback in two sets. The midpipe and the axle-back. Most people just buy the axle back and get custom piping for it. I think each set (midpipe and axle-back) is about $450 EACH. And to answer your question: It will fit because you will probably buy just the axleback and then have to buy custom piping

 

Ok, so if i just buy the axleback and get custom piping, ill be fine?

 

Ya. If you want, you can ask them to position it so that it angles alot or a little or not at all

 

Do most exhaust shops crush bend or mandrel bend their pipes? Also, on K-teller, they have exhaust piping in 3",2.5", and 2.25" and it just has no muffler. I figured i could get that, have them cut and weld where they need.

 

If you are lucky, you could find a exhaust shop that does mandrel bends. but most that you will run into are bent by a machine (probably that crush bending ur talking about)