i bought an apex'i turbo timer and i know what some of the wires do

grey = hand brake
white = o2
black = ground
red = constant power

the questions right here :

blue = ig2 = what color wire does this connect too?

green = ig1 = what color does this wire connect too?


thanks

 

oh and btw, 4dr Lx Civic 1999

 

It really helps if you have a Helms manual or a wiring diagram to show you which ignition wire is energized so you know which wire to hook up. The ignition 1 wire goes to the wire that is energized when the key is in the on position with the engine off. The ignition 2 wire goes to the wire that is energized when the key is in the on position with the engine on.

And I think that the white wire that you said connects to the O2 sensor wire actually connects to the VSS like it did on my Greddy TT.

 

in the instruction manual it says "(O2 sensor signal (white wire)"

also i dont have the helms or haynes manual where im currently located..although i have it at my house which is clear across town. we have it mostly wired up, and the car is apart..., if anyone has it, can you please look for me


thanks

ps: just the colors of the wires

 

OK, I guess Apexi and Greddy have different wiring.

On my Integra, the ign 1 wire was black/yellow and ign 2 was yellow. I don't know if it is the same for you but it may help.

 

we got it

blue wire -> ign1 = black w/ a yellow stripe
green wire -> ign2 = white w/ a black stripe

oh and btw thanks for your help also

 

Good to hear. At least I was right on 1 out of 2. h: