Custom ITBs!
Thread Starter
Senior Member
Joined: Mar 2005
Posts: 128
Likes: 0
Custom ITBs!
I wanna build a custom set of individual throttle bodies. I heard u can get them off a bike (CBR, or GSX-r) and get a special weld and make ur ITB's. Is this true? and what is the process in doing this?
Senior Member
Joined: Jun 2002
Posts: 1,751
Likes: 0
From: montgomery alabama
yes they work fenomenal on BUILT b's. Also they suck up fuel and are a bastard to tune. They dont mix well with hondata, and they have idle problems, other than that, they are gold if you NEED them.
Thread Starter
Senior Member
Joined: Mar 2005
Posts: 128
Likes: 0
well i did some reading, and it seems like a big part of n/a. if i take it to a dyno and let pro's tune it/build it. i should be ok think. it'd be a good power gain. but you know anyone that has actualy built their own set?
4500rpm hesitation
Joined: Jun 2003
Posts: 4,374
Likes: 0
From: Hesperia
Originally Posted by gordis
my engine is a B series. harder or easier to make?
Should be easier if not the same.
ITB's are a great project imo, but not on a stock B.(although stockers will benefit from them as well.)