1999 Civic Ex Camber
#1
1999 Civic Ex Camber
70,000 miles.......noticed camber issues after checking tires. I understand stock Honda no have camber adjustment. So, I should be prepared for alignment shop to tell me that I need a camber kit in order for them to align , right? How much do ya all think they will want to install? Can I do it myself? Then bring in for alignment? This is a plain old stock civic .
#2
Honorary Moderator Alumni
Join Date: Sep 1999
Location: Someplace with cones=AUTO
Posts: 8,735
Likes: 0
Received 0 Likes
on
0 Posts
Toe kills tires quicker than camber.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
#5
thats right im a NOOB!
Join Date: Feb 2005
Location: columbia, MO
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
02-03-2005, 12:12 AM #2 westcoaststyle vbmenu_register("postmenu_2157003", true);
Tired
Join Date: Sep 2000
Location: CO
Posts: 12,281
Trader Rating: (30)
Images in these threads to help you understand:
https://www.honda-acura.net/forums/s...ighlight=camber
https://www.honda-acura.net/forums/s...ighlight=camber
__________________
App/Cos & Super Mod
MY GARAGE
389.79whp / 302.62tq @ 20psi on ~9.5:1 CR - DYNO PROVEN
Best Time To Date - 12.607 @ 114.86 @ 12.6psi on street tires
View My Feedbacks & ADD TO THEM!!!
as westcoaststyle would say: this question has been asked before and check out these sites they show installation of camber kit. (i personally just installed my camber kit about a week ago and it is easy if you have any common knowledge about anything. i couldnt do it all on my own because the stupid bolt wouldnt come out of the pivot joint but is was the original parts from 1989 so it had some time to rust up. and all my hard work was for nothing cuz i just had to get 3 ball joints and a wheel bearing replaced the day after install). good luck
Tired
Join Date: Sep 2000
Location: CO
Posts: 12,281
Trader Rating: (30)
Images in these threads to help you understand:
https://www.honda-acura.net/forums/s...ighlight=camber
https://www.honda-acura.net/forums/s...ighlight=camber
__________________
App/Cos & Super Mod
MY GARAGE
389.79whp / 302.62tq @ 20psi on ~9.5:1 CR - DYNO PROVEN
Best Time To Date - 12.607 @ 114.86 @ 12.6psi on street tires
View My Feedbacks & ADD TO THEM!!!
Check out HONDA CHALLENGE!! - I designed the site too.
as westcoaststyle would say: this question has been asked before and check out these sites they show installation of camber kit. (i personally just installed my camber kit about a week ago and it is easy if you have any common knowledge about anything. i couldnt do it all on my own because the stupid bolt wouldnt come out of the pivot joint but is was the original parts from 1989 so it had some time to rust up. and all my hard work was for nothing cuz i just had to get 3 ball joints and a wheel bearing replaced the day after install). good luck
#6
I had a fairly easy time installing these skunk2 camber adj. arms in my civic. Then just took to firestone and had them align...
http://www.nopionline.com/nopistore/...20Civic%201999
http://www.nopionline.com/nopistore/...20Civic%201999