I'd like to do the swap myself but the problem is I have no idea what i'm doing. I have access to a shop with a hoist and all the tools needed to do a swap. I'm wondering if you guys could give me a hand. These are the questions i've got:

-Which B16 should i use?

-What additional parts do i need to buy for this swap?

-how long should the swap take all together?

-are there any resources on the internet that i can use?

I'd really appreciate the help guys even if you can only answer one of the questions.

 

I would look up Impoart Auto salavage, they sell good quality swaps, with all the parts you need.

 

if you want to get a b16, just make sure it's obd1. That will be the cleanest and easiest way to swap it in. If you can get a complete swap from a unkyard or import engine supplier, make sure you get the complete swap with ecu, mounts, shift linkage, axles, etc. It will all bolt directly in. The only difference will be that your map sensor is on the firewall as opposed to the TB on the B series.