Hello,
I was wondering if someone could direct me in installing a passenger side headlight in my car. Maybe pictures or diagrams, any info would be great. Thanks in advance.
Josh

 

Just the bulb or the whole headlight housing?

 

the whole headlight assembly

 

It requires the removal of the front bumper. Once you remove that, you should be able to see all the bolts.

 

thanks for the help. I will give that a shot and see how it goes.

 

5 pop plastic tabs on top of the bumper
2 phillips screws in the fender well
2 10mm bolts under the bumper

Remove those and the bumper will slide off. After that you will see the other 2 10mm bolts that hold the headlight on, along with the 2 that you can see from just looking at it under the hood.
Those that say you can do it w/o taking the bumper off......eat me

 

sometimes the fender well lining is screwd into the bottom of the bumper too so be aware of those.