Quick run through, pls correct me if im wrong....friends' 5th gen.

Cracked Radiator....To replace, drain, undo hoses, unbolt, replace, rehose, fill at top of radiator......

no tricks on these right?

Thanks, Scott

 

you pretty much got it, make sure the engine is cold, and fill the rad up to the top, place the cap on, turn on the car, go back take the cap off and fill till its full, when your car turns on the engine will pull some rad fulid into the engine. this is what i was told by a Honda Tech, when i replaced my on A SOHC. hope that helps

 

Check the stickies in this forum for the helms manual.

 

sweet thanks....didnt know if there were any radical differences on the 5th gen from my 6th, and i only have the 6th gen shop man.