H22 Swap
#1
Senior Member
Thread Starter
Join Date: Jun 2004
Location: Maryland
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
H22 Swap
Will a H22 bolt right up into a my 92 Civic Dx hatch or do i need to get new axles or motor mounts or anything else or do i need to do any modifactions. thanks
#4
Originally Posted by dE.fUsEd
i was told you can't use H22 axels.
#5
if you dont know for fact what is neccessary, dont post guesses please.
The H22A will require you to get the HASport motor mount kit, and cut a lil peice out or bash in with a BFH but other than that, it isnt that bad of a swap.
As far as the axles are concerned, I would recomend the HASport axles as they are beefier, and are the right length etc.
if you want to use a stock combination you can use an Accord intermediate shaft in combination with 90-93 integra axles. I would recomend the 90-93 GSR axles as they are slightly beefier.
The H22A will require you to get the HASport motor mount kit, and cut a lil peice out or bash in with a BFH but other than that, it isnt that bad of a swap.
As far as the axles are concerned, I would recomend the HASport axles as they are beefier, and are the right length etc.
if you want to use a stock combination you can use an Accord intermediate shaft in combination with 90-93 integra axles. I would recomend the 90-93 GSR axles as they are slightly beefier.
#7
I still like honda's. :-/
Originally Posted by b18c1_hatch
where can i get the HASport motor mount kit
http://hasport.com/ :doh: