How do I get these off/out?
Oct 6, 2004 | 01:11 PM
Thread Starter
Joined: Dec 2002
Posts: 3,196
Likes: 0
From: Newnan, Ga
How do I get these off/out?
How do I get this piece off my dash? Also, how do you take out the climate control?
Oct 6, 2004 | 01:19 PM
Joined: Jun 2004
Posts: 341
Likes: 0
There's screws all around it. I think you'll probably have to take off the dashboard (unless you're just that good). Check the helms for all the screw locations.
Oct 6, 2004 | 01:26 PM
Thread Starter
Joined: Dec 2002
Posts: 3,196
Likes: 0
From: Newnan, Ga
Anyone have a helms and can snap some shots of the screw locations for me or an online version? Thanks in advance.
Oct 6, 2004 | 01:30 PM
Joined: Sep 2003
Posts: 5,565
Likes: 0
From: overthere
i think there mostly clips
Oct 6, 2004 | 01:33 PM
Joined: Mar 2004
Posts: 4,463
Likes: 0
From: Girard, Ohio
i saw a buddy of mine try & pry on it with a screw driver & really messed up the dash!
Oct 6, 2004 | 02:00 PM
Joined: Aug 2000
Posts: 27,129
Likes: 0
the dash is held on mostly by clips. annoying clips that break if you dont pull in a certain direction. i'll try to get a helms diagram...
Oct 6, 2004 | 02:28 PM
Joined: Sep 2004
Posts: 2,920
Likes: 0
From: Irvine CA
There might be screws behind the buttons. Try to take the buttons off and see if that works. I've seen that in some hondas.
Oct 6, 2004 | 05:55 PM
Joined: Mar 2002
Posts: 946
Likes: 0
From: Lincoln, NE
that trim piece is held in by screws, do i need to take more pics and do a write up?
Oct 6, 2004 | 06:05 PM
Joined: Mar 2002
Posts: 946
Likes: 0
From: Lincoln, NE
screw it i'm not going to host em and do a write up, i'm just gonna attach em
Oct 7, 2004 | 12:30 AM
Thread Starter
Joined: Dec 2002
Posts: 3,196
Likes: 0
From: Newnan, Ga
ah ok, how many screws are there and how exactly would I be able to get to the screws without taking the entire dash off?
