Im getting a B16 SIR 92-95 Motor put into my 92 Civic Hatch DX. Will the stock motor mounts bolt right up or do i have to do any modifications and what else do i need to get this swap complete.

 

bump

 

well that depends on what you mean by stock motor mounts. The stock B16 ones will, the stock d-series ones will not.

You will need a b-series AC mount, rear bracket mount, driver's side upper (cam) mount, and right front transmission mount. The upper transmission mount will work, and you can re-use your rubber mounting D-bracket thingy for the a/c mount and the rear mount.

:edit: here's a helpful picture stolen from H-T

 

it should blot right up, the only thing you will need is a a/c bracket of a bseries del sol....its best to buy a "complete swap" other wise your swap experiance will be bad.

hmotorsonline.com is where I have bought to of my engines from, a b16a SiR II and a B18c..I am happy with both~!

 

thats where im getting my motor from Hmotors did it come with all the hard ware motor moust exdera

 

came with everything...except for that a/c bracket...thats if you want a/c


how much is it gonna cost shipped?....$2700 or so....right


I am selling my b16a SiR II, the one i bought from them.....find out how much they want for theres and if you are interested i will sell you mine for cheaper...my motor will come with everything....except for that a/c bracket which i am using in my b18c...anyway I want $2200 for my motor..not including shipping....but i am sure shipping wont be $500. So $2200+ what ever shipping is. Motor has no more than 42k on it. Mail me at stuckmofo@hotmail.com

and if you are not interested, i highly reccomend hmotors!

 

So much misinformation in this thread it's not even funny. The JDM B16A (SirII) OBDI, has the SAME mount as the 92-93 Honda Civic D-Series. In 94-95 Honda changed the design of the D-Series mounts, they are the same ones as the 94+ Acura Integra. I'll post pics if you guys don't understand what I'm saying.

 

:eek3:

I could have sworn a couple mounts were different due to slightly different block dimensions.

Is this why I've seen a del Sol with an aluminum driver's side mount while the 92-93 Civics I've seen have a stamped steel driver's side mount?

Pictures please?

It would be a really informative thing to have on the board to qoute/link later.

 

That is why you have seen different mounts, I don't think it's so much the block dimensions rather, an update in the design. Sure, I'll post em up tomorrow.

 

please do. i've never heard that.