it's time to kick ass and chew bubble gum...
Thread Starter
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
Originally Posted by 96Civic_Coupe
how long did it take u to do your lamps?
well, it took me a little longer than normal, but I did mine a little different...
I had a set of projectors, which had a completely clear outer lens (opposed to the normal 96-98 lens, with all the ribbing). So I took apart both my OEM lights and the projectors, cleared and painted the OEM housings, and slapped the projector outer lens on top....
they leak like a motherfawker
h:it took about 4 hours all said and done... with a couple of smoke breaks :bandito:
btw, if anyone sees a set of CTR headlamps under $400, let me know
Thread Starter
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
Originally Posted by 96Civic_Coupe
so.......did u need a blowdryer at all? and how did u seal em back up (clamps,tape, etc.)
cleaned off the glue. Then used silicon glue or some shit. but it didn't work too well... I think the housings a tad big for the outter lens....