Need Stronger Head Gasket For D16y8 Turbo

Reply Subscribe

Thread Tools

Aug 16, 2004 | 01:26 PM

reddemon009

Thread Starter

Senior Member

Joined: Jul 2002

Posts: 114

Likes: 0

Need Stronger Head Gasket For D16y8 Turbo

I keep blowing my stock head gasket on my d16y8. im running 10 psi i want to put a after market stronger and thicker head gasket on. wat companys make a gasket for this motor? thanks

Aug 16, 2004 | 01:32 PM

XCM828

stay off of wet roads

Joined: Aug 2004

Posts: 164

Likes: 0

From: NC

try this...http://www.horsepowerfreaks.com/defa...ategoryCd=HGAS

Aug 16, 2004 | 01:40 PM

igo4bmx

CockBlockerator

Joined: May 2002

Posts: 1,771

Likes: 0

From: philly pa

you should stick with oem head gaskets and get some head studs...
also check your head and block's mating surfaces for warpage

Aug 16, 2004 | 07:39 PM

westcoaststyle

Still here... sorta...

Joined: Sep 2000

Posts: 17,177

Likes: 2

From: CO

I run a cometic head gasket. I'm very pleased with it.

You SERIOUSLY should get some head studs too since you have to take the head off anyway.

hih

Aug 17, 2004 | 11:59 AM

reddemon009

Thread Starter

Senior Member

Joined: Jul 2002

Posts: 114

Likes: 0

how thick is your cometic head gasket?? i want it thick enough to lower my compression a half point may b a lil bit more so i can run more boost. thanks

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump