ok not sure where to put this but whats the diff in single bend and dual bed short shifters

 

placement

single usually places the shifter further away from you
dual puts it in more of a stock location, but still gives you a nice short shift.

 

o ok i always wondered about that...skunk 2? good shifter?

 

very, I just put one on my car h:

previously had a B&M that was a single bend. I haven't been able to use the skunk2 yet, obviously.

 

well i dont really have any mods as of now but i know someone that can get me one dirt cheap so....is it hard to install

 

simple. there might be a thread or link about it in the online resources thread in here. :goodjob:

 

o ok thanx for that help

 

sure thing. If you can't find a good diy, PM me and I'll make one.

 

ok i think i get how to install it but whats this about bushings :thinking:

 

just get a stock gsr dual bend shifter and some es shifter bushings, make sure u get the bushings accordin to ur engine ie there is a SOHC and a DOHC kit. the bushings help stablize that linkage makin the shifts feel more positive rather then sloppy with the stock rubber bushings. if you must get a short shifter, get the skunk2 dual bend, very nice piece.

im rockin the stock gsr dual bend shifter with neuspeed shifter bushings and it rocks. :thumbup: