My Dyno Day
After waiting for almost 3 years, I finally dyno'd my ride. It was nice and cool today, so a perfect time to strap down! If you can't read the numbers well, here they are:
Pull #1 - 219.6/203.78
Pull #2 - 217.1/205.48
Runs done at 11psi in 3rd gear up to 7200RPM. The graphs speak for themselves:


FAQs:
Look at my siggy for mods
No tuning was done or has ever been done
Stock timing and fuel pump
Here's the vid (20MB):
Good Quality - Large
This one is for the "bandwidth challenged" (4MB):
Lower Quality - Small
Pull #1 - 219.6/203.78
Pull #2 - 217.1/205.48
Runs done at 11psi in 3rd gear up to 7200RPM. The graphs speak for themselves:
FAQs:
Look at my siggy for mods
No tuning was done or has ever been done
Stock timing and fuel pump
Here's the vid (20MB):
Good Quality - Large
This one is for the "bandwidth challenged" (4MB):
Lower Quality - Small
Originally Posted by Wharbone
Nice! are you going to get some new 1/4 mile times soon? :thumbup:
that's awsome...now that i have 440's, i'll probably get my car tuned with my new hondata at around 11lbs. greddy kits aren't nearly as bad as everyone thinks. i'll keep you posted.
i only netted 185whp...but that was at only about 7 lbs. do you have the greddy downpipe, or have you replaced that 1-3/4" pipe?
i only netted 185whp...but that was at only about 7 lbs. do you have the greddy downpipe, or have you replaced that 1-3/4" pipe?


