I bought a aftermarket tach and it says to hook the green wire to the negative on the coil or the tach termanal on the electronic ignition. Well I cant find eaither can someone that hooked one up tell me where the hell to hook it.
Its for a 94 civic dx Thanks alot.

 

http://www.overboost.com/story.asp?id=1142#theend


This is a link to what you should do !

 

Still need some help on this I have searched my Ass off but havent gotten a clear answer. Please help.

 

behind the cluster in the dash there is a wire to where the tach would be if you didnt have a DX. I can't remember what color it is... get a hanes guide or manual and look in the diagrams for the RPM sensor. Also, there is a wire in the engine bay on the right side near firewall that is a diagnostics wire for the RPM sensor, you can use it as well.

 

the wire is blue...

 

you hook the green wire up to one of the little ports of the plug that plugs into the distributor

 

Well actually the plug was under the hood by the firewall . It's the only blue wire that is loss with a cover plug on it ! Thanks for letting me know . God job !

 

see if this helps....pic sux

 

there is also a plug up by the driver side door that can be tapped.. ill try to take a picture later

 

or you can pull your gauge cluster and find the blue tach wire....lengthen it...and voila...thats what I did....