need some help here guys
#1
Mr. Motorhead
Thread Starter
Join Date: May 2003
Location: middle of no-where
Posts: 1,031
Likes: 0
Received 0 Likes
on
0 Posts
need some help here guys
i have a 97 civic dx hb.... i just bought a front clip from a 2000 si. how hard is it to change the entire dash over to my 97? i don't want to chop up the si wiring. i want it to look factory stock. is it a unbolt and unplug swap? also...when i swap the motors...do i need the fuel pump from the si? also...anything else that i need please let me know..
#2
Registered User
Join Date: Sep 2003
Location: Northern Virginia
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
lucky you..
most of the stuff will just transfer over, I doubt you'll really need to wire anything up differently as long as your car is manual..everything should just plug and play (minus tachometer from SI cluster)...don't quote me though
most of the stuff will just transfer over, I doubt you'll really need to wire anything up differently as long as your car is manual..everything should just plug and play (minus tachometer from SI cluster)...don't quote me though
#3
Yeah everything will plug and play ! The whole thing ! and no you do not need the fuel pump but I guess its a plus to slap it in if you have it . Good luck and happy you !
#5
Still here... sorta...
Originally posted by honura
Yeah everything will plug and play ! The whole thing ! and no you do not need the fuel pump but I guess its a plus to slap it in if you have it . Good luck and happy you !
Yeah everything will plug and play ! The whole thing ! and no you do not need the fuel pump but I guess its a plus to slap it in if you have it . Good luck and happy you !