Finally finished my trunk!
Senior Member
Joined: Jun 2002
Posts: 182
Likes: 0
From: chicago
this is on a piece of plywood on the back of my seat. the wires go through wood and behind seat carpet.
sub box is angled on the back to fit right up against the amps and is angled in the front to be parallel to closed hatch glass.
im gonna do it over again with a different setup that i am working on now as i mentioned before......think i'm gonna use fiberglass and matte the s$$$ out of it.
sub box is angled on the back to fit right up against the amps and is angled in the front to be parallel to closed hatch glass.
im gonna do it over again with a different setup that i am working on now as i mentioned before......think i'm gonna use fiberglass and matte the s$$$ out of it.
It's my first day.
Joined: Nov 2001
Posts: 13,635
Likes: 0
From: Grafton, WI.
Originally posted by derf
how did you get only 2 inches showing under the hood, i have like 5 inches.. from the battery to the fuse holder and then running to the hole in the firewall
how did you get only 2 inches showing under the hood, i have like 5 inches.. from the battery to the fuse holder and then running to the hole in the firewall
Thread Starter
Spec5
Joined: May 2002
Posts: 1,353
Likes: 0
From: Northern VA
nah not a big deal. i think i'll use some of that black wire loom i got with it to cover up the red.... i'll figure out a way to hide my wires i thought i already did a pretty good job doing so w/o cutting anything (don't really want to cut it)
I was going to mount all the stuff on the back of my seat... BUT that makes folding my seat down completely useless. hence the removeability of my sub...
any suggestions as to were to put my cap? I was thinking about mounting it at an angle on that retangular bulge that comes out of the side of the car (above the lower right amp) what do you think? if i put it on the other side of the car (lower left) there would be too much wire to run. live wire in fact.
I was going to mount all the stuff on the back of my seat... BUT that makes folding my seat down completely useless. hence the removeability of my sub...
any suggestions as to were to put my cap? I was thinking about mounting it at an angle on that retangular bulge that comes out of the side of the car (above the lower right amp) what do you think? if i put it on the other side of the car (lower left) there would be too much wire to run. live wire in fact.
Senior Member
Joined: Jul 2002
Posts: 1,065
Likes: 0
From: Raleigh, NC
Originally posted by crucial Si
derf looks to me your bass must not sound that good.....bass needs something to bounce off of to create the sound of bass, looks to me its to far away from the trunk lid...your probobably not getting the maximum bass you can get from your speaker.
derf looks to me your bass must not sound that good.....bass needs something to bounce off of to create the sound of bass, looks to me its to far away from the trunk lid...your probobably not getting the maximum bass you can get from your speaker.
sancho on the sizzide!
Joined: Aug 2000
Posts: 27,129
Likes: 0
hey derf...is that an Alpine V12? 
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
It's my first day.
Joined: Nov 2001
Posts: 13,635
Likes: 0
From: Grafton, WI.
This thread is so aching for a move. arch iceman and will can put all the misnomers in their place in a hurry.
if i wanted to wreck my interior id cut a hole and slide the cap down in the sidewalls. though, the way my box is setup if i ever need to do taht im just going to drill a hole in the top and glass it in there.
if i wanted to wreck my interior id cut a hole and slide the cap down in the sidewalls. though, the way my box is setup if i ever need to do taht im just going to drill a hole in the top and glass it in there.
Thread Starter
Spec5
Joined: May 2002
Posts: 1,353
Likes: 0
From: Northern VA
i think i'm going to mount the cap on that sideways box lookin thing on the right side. its actually the factory disc changer mount that comes with all the cars?
asiandood: yes those are BOTH alpine subs. you like? i like :yay:
i think if i get anything speaker wise before anything is blown is a type-r sub
boom
boom
boom :thumbup:
asiandood: yes those are BOTH alpine subs. you like? i like :yay:
i think if i get anything speaker wise before anything is blown is a type-r sub
boom
boom
boom :thumbup:
