Installing jdm civic 92-95 rear interior
12-12-2003, 07:29 PM
#1
Member
Thread Starter
Join Date: Aug 2002
Location: Nor Cal
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Installing jdm civic 92-95 rear interior
Anyone know how to do this? I tried putting it on but it seems there is a metal piece in the way so I can't put on the side panels. Need help asap. Thanks
12-12-2003, 07:36 PM
#2
sancho on the sizzide!
Join Date: Aug 2000
Posts: 27,129
Likes: 0
Received 0 Likes
on
0 Posts
hatchback or sedan?
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
12-12-2003, 11:41 PM
#3
X-Motoring
Join Date: Nov 2000
Location: bay area
Posts: 2,530
Likes: 0
Received 0 Likes
on
0 Posts
if its the hatch, u need to redrill the side holes for the eg6 seats. did also get the middle bracket for the middle support for the seats as well? very cruial piece, my friend didnt get his, so he made one out of metal and drill and bolt in place. other then that its all bolt on.
12-13-2003, 03:31 AM
#4
Member
Thread Starter
Join Date: Aug 2002
Location: Nor Cal
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
This is for the hatch...I tried putting the side panels on first. I have to double check if I have that middle support. But anyways, the side panels wont go on b/c that side piece that is welded on to the wheel well sticks out. That has this bracket that holds up the usdm rear seats, with 2 11m socket size nuts. I removed that bracket but the metal peice is still in the way. I'll take some pictures to show you guys.