Honda-Acura.net

Notices

Brake rotor

Thread Tools
 
Old Dec 12, 2003 | 12:35 AM
Share
  #1  
kerokeron's Avatar
kerokeron
Thread Starter
Junior Member
 
Joined: Jan 2003
Posts: 18
Likes: 0
From: CA, San Jose
Default Brake rotor
Does brake rotor (front) from CRX si fits to del sol si model?
Reply
0
Old Dec 12, 2003 | 06:10 AM
Share
  #2  
sxecrow's Avatar
sxecrow
Banned
 
Joined: May 2003
Posts: 4,058
Likes: 0
From: Tampa, FL
Default
what size is the rotor on the CRX? I believe they would fit, however the rear is different. Bakeoff or OSX can confirm.
Reply
0
Old Dec 12, 2003 | 03:13 PM
Share
  #3  
kerokeron's Avatar
kerokeron
Thread Starter
Junior Member
 
Joined: Jan 2003
Posts: 18
Likes: 0
From: CA, San Jose
Default
Thanks,
I will take the tires and check the size.
I dont have problems on the rear. besides, my crx has drums on the rear. del sol are four disk brakes.

Thank you for you help.
Reply
0
Old Dec 12, 2003 | 03:50 PM
Share
  #4  
Bakeoff's Avatar
Bakeoff
wooooo woooooooooo
 
Joined: Mar 2002
Posts: 3,134
Likes: 0
From: Twin Cities
Default
not all sols had rear disks!

If you're swapping the front rotors from an S, yes it will work, not sure if the Si's had bigger brakes than the S... Check the part numbers on www.hondaautomotiveparts.com
Reply
0
Old Dec 12, 2003 | 04:24 PM
Share
  #5  
sxecrow's Avatar
sxecrow
Banned
 
Joined: May 2003
Posts: 4,058
Likes: 0
From: Tampa, FL
Default
Si has disks :doh:
Reply
0
Old Dec 12, 2003 | 08:45 PM
Share
  #6  
OSX2000's Avatar
OSX2000
Do what must be done.
 
Joined: Apr 2003
Posts: 1,901
Likes: 0
From: Fountain Valley, CA
Default
Front rotors aren't the same size for all del Sols. S had rear drums, Si and VTEC had rear disks.
Reply
0
Old Dec 12, 2003 | 08:47 PM
Share
  #7  
rtpassini's Avatar
rtpassini
Registered User
 
Joined: Jul 2003
Posts: 657
Likes: 0
From: Plymouth, WI
Default
but the vtecs have different size ones.
Reply
0
Old Dec 12, 2003 | 09:29 PM
Share
  #8  
OSX2000's Avatar
OSX2000
Do what must be done.
 
Joined: Apr 2003
Posts: 1,901
Likes: 0
From: Fountain Valley, CA
Default
Exactly...VTEC fronts are 10.3" in diameter, S and Si fronts are 9.4".
Reply
0
Old Dec 12, 2003 | 10:55 PM
Share
  #9  
Motohip's Avatar
Motohip
Junior Member
 
Joined: Apr 2003
Posts: 1,608
Likes: 0
From: Portland, Vancouver
Default
Hmmm...is one inch that much of a diff? That would be a cheap upgrade. Dontcha think? :dunno:
Reply
0
Old Dec 13, 2003 | 01:26 AM
Share
  #10  
OSX2000's Avatar
OSX2000
Do what must be done.
 
Joined: Apr 2003
Posts: 1,901
Likes: 0
From: Fountain Valley, CA
Default
Don't matter to me, I'm gonna get slotted rotors anyways... :boink:
Reply
0



Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -8. The time now is 09:29 PM.