Notices

sound deaden

Thread Tools
 
Old Nov 23, 2003 | 05:11 PM
  #1  
alpin3's Avatar
alpin3
Thread Starter
Junior Member
 
Joined: Nov 2003
Posts: 2
Likes: 0
From: Mizzou
Default sound deaden

I am looking to sound deaden my car, I have a 2000 4-door EX. Are there any instructions with pictures and the like to tear down the interior of my car? Taking off door panels, roofing, everything? Thanks

Also, does anyone have any exp doing this? Please share problems, or anything...
Reply
Old Nov 23, 2003 | 05:30 PM
  #2  
YeaItsAFourDoor's Avatar
YeaItsAFourDoor
..::-Free your mind-::..
 
Joined: Sep 2003
Posts: 572
Likes: 0
Default

All i have to say is that those door panels are a headache..
Reply
Old Nov 23, 2003 | 06:42 PM
  #3  
Wharbone's Avatar
Wharbone
Senior Member
 
Joined: Apr 2003
Posts: 6,157
Likes: 0
From: Dallas, TX
Default

I don't have any experience with a 2000, but on a 5th gen the door panels are pretty easy to take off. You just take out the screws in the door coin holder thing and the door handle. Then you disconnect the door handle linkage. After that you have to pry the rest of the door off because it is held on now by plastic clips. I used a large screw driver to pry them off, and it worked with no problems. I don't know how a 2000 would differ from this.

I would say the roofing, and under the carpet would be the toughest. I don't really know about them. Get a repair manual, and it should be able to tell you a lot.
Reply




All times are GMT -8. The time now is 04:31 PM.