Honda/acura V6 Conversion
it's my D in a B
Joined: Aug 2001
Posts: 24,787
Likes: 1
From: Your Mom's House
Originally posted by hondajeff
we have one of these CL's in the shop right now and I was checking everything out. I would maybe have to notch the frame because the engine and tranny together are wider.definately would have to make axels. the height would be the biggest factor would either have to have the engine hang under alittle or use a cowl hood. the cl engine sits on a cradle which bolts to the frame and all suspension is attached. I could use my existing eg suspension but would have to upgrade the springs and weld in cross members to support the engine mounts. I have a 95 coupe i can chop up and I want to go all out on it. these motors are not in high demand so,they arev accually cheaper than the 4cyl GSR.
we have one of these CL's in the shop right now and I was checking everything out. I would maybe have to notch the frame because the engine and tranny together are wider.definately would have to make axels. the height would be the biggest factor would either have to have the engine hang under alittle or use a cowl hood. the cl engine sits on a cradle which bolts to the frame and all suspension is attached. I could use my existing eg suspension but would have to upgrade the springs and weld in cross members to support the engine mounts. I have a 95 coupe i can chop up and I want to go all out on it. these motors are not in high demand so,they arev accually cheaper than the 4cyl GSR.
