How To Paint This?
#11
not OG but Old School
Join Date: Apr 2003
Location: Decatur, IN
Posts: 1,998
Likes: 0
Received 0 Likes
on
0 Posts
great googely moogely old thread, you don't have to remove your wiper arms just take a big piece of cardboard and stick it behind the wiper arms and be careful
#12
Senior Member
Join Date: May 2003
Location: New Jersey
Posts: 1,979
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tiësto
I think that's what he ment
It's a common civic problem..that and the windshield wiper arms
Get a can of Krylon flat black spray paint and mask it off REALLY GOOD. Just take newspaper and some masking tape then go to town. I'd sand it a bit first though...like a 400 grit then a 800 grit after the first couple coats I wouldn't risk taking it off. I think it's glued on or something
It's a common civic problem..that and the windshield wiper arms
Get a can of Krylon flat black spray paint and mask it off REALLY GOOD. Just take newspaper and some masking tape then go to town. I'd sand it a bit first though...like a 400 grit then a 800 grit after the first couple coats I wouldn't risk taking it off. I think it's glued on or something
#13
Want Boost!
Thread Starter
Join Date: May 2002
Location: Ontario
Posts: 2,624
Likes: 0
Received 0 Likes
on
0 Posts
:shocked:
This is an old arse thread, wow.
Just take your wiper arms off, it only one bolt. Through them on some newspaper and paint bomb the suckers.
This is an old arse thread, wow.
Just take your wiper arms off, it only one bolt. Through them on some newspaper and paint bomb the suckers.
#14
wtf goes here?
Join Date: Dec 2003
Location: Charlotte, NC
Posts: 5,782
Likes: 0
Received 0 Likes
on
0 Posts
usually the trim pieces have like 2 screw on the back then pop off...and if you don't want to use a razor to get any overspray off...steel wool works the best
#15
i had a simlar problem with my trim on my eg, but it would be faded black, and not so good looking. i popped off the pieces that would come off (to reveal a but load of leaves and crap) and just simply hosed em down, and then painted them with basic black primer, nothing fancy and it did the job great, and if i felt bored, i would use clear coat on em, dont know if i used enough to make a difference though.
#16
Originally Posted by The G2 Racer
:shocked:
This is an old arse thread, wow.
Just take your wiper arms off, it only one bolt. Through them on some newspaper and paint bomb the suckers.
This is an old arse thread, wow.
Just take your wiper arms off, it only one bolt. Through them on some newspaper and paint bomb the suckers.
#17
wtf goes here?
Join Date: Dec 2003
Location: Charlotte, NC
Posts: 5,782
Likes: 0
Received 0 Likes
on
0 Posts
The wiper arms have some locks on it where it snaps in. When you take the bolt off...take a flat head screw driver, and pry it off. Take your time and be gentle...sometimes you can just wiggle the F*ck out of it until it comes off.
#19
Want Boost!
Thread Starter
Join Date: May 2002
Location: Ontario
Posts: 2,624
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by c_rogue69
The wiper arms have some locks on it where it snaps in. When you take the bolt off...take a flat head screw driver, and pry it off. Take your time and be gentle...sometimes you can just wiggle the F*ck out of it until it comes off.
Thread
Thread Starter
Forum
Replies
Last Post
95TEGGY
Do It Yourself
5
09-28-2003 08:22 PM