Outxider...and all others that have it...


I found a source for the CUSCO MC brace....but they told me it was the DC2 LHD version. Will that fit my EG? They told me there's a clearance problem because they made it to clear the DC2 brake line. I dont have one that gets in the way...am I ok with this? I know you guys have the JDM version that you flipped.

 

well, I had the Mc stopper for rhd and had Cusco make me a Lhd prototype. The issue we had was that I measured it when I had the stock civic booster/mc and now I have the itr booster/ mc. So now the prototype is lil off. I'll update you of when the lhd mc stopper will be done.

 

oh yeah, the brace does fit if it is LHD. Where did you get that source from. pm me...=)

 

doood, just get the dc2 rhd, flipped it and call it a day. clears the brake lines just fine. tho unless u have an itr mc, it need to cut a notch out but the teggy one like urs should be no prob. check it out...

 

someone explain to me the benefits of one of these

 

have someone step on the brakes and observe the mc from the engine bay. you will c that the mc has a lot of play due to the flimsy firewall. the mc brace helps prevents that and provides consistant brakin. its simple yet effective mod.

 

Peculiar, what's the cost on one of these?

 

yeah it sounds like a good mod :rick:

 

rangin from 50-70 bukks. i got mines for 50 bukks from machiii.net.

 

Hey, the DC one should work just fine, you MIGHT have to cut a notch on the bracket if your brake line hits it, that's about it. I got the RHD version and did what Outxider did... works like a charm... I can do a little write up if you want.

Function Factor: :thumbup:
Bling Factor: :thumbup: