2 door and 4 door...same front bumper?
Administrator ☂
Joined: Jul 2002
Posts: 56,734
Likes: 3
From: NY
Re: 2 door and 4 door...same front bumper?
Sorry, I have been busy at work today.
To answer a few questions.
Simple answer, it does not fit...
unless you do some modifications.
How as you guys asked,
I was writing up a DIY, but it got side-tracked and I never got around to do it, wish I did so I can help all those that want to try this ever growing new trend.
- I used 2/3dr Corners.
- Kept the Sedan fenders.
- Had to redrill holes on bumper.
- Have a strong friend (thanks Don_R6) stretch out bumper to have it match as closely as possible.
To answer a few questions.
Originally posted by WyldRyde
Really quick and easy question. Does anyone know for sure if a front bumper for a 2dr 5gen civic will fit the 4dr 5gen?
Really quick and easy question. Does anyone know for sure if a front bumper for a 2dr 5gen civic will fit the 4dr 5gen?
unless you do some modifications.
How as you guys asked,
I was writing up a DIY, but it got side-tracked and I never got around to do it, wish I did so I can help all those that want to try this ever growing new trend.
- I used 2/3dr Corners.
- Kept the Sedan fenders.
- Had to redrill holes on bumper.
- Have a strong friend (thanks Don_R6) stretch out bumper to have it match as closely as possible.
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
Senior Member
Joined: Apr 2003
Posts: 6,157
Likes: 0
From: Dallas, TX
"As for the conversion, all that is really needed is the Coupe/Hatchback bumper (they should be the same) I asked for the Si front bumper.
The bumper holes do not line up, not even close, you must dremel your own holes to match to the fenders. In actuallity, it was not as bad as some thought.
The corners bolt right in. "
MaxBoost wrote this in this post:
https://www.honda-acura.net/forums/s...light=maxboost
Was there anything else you had to do MB?
The bumper holes do not line up, not even close, you must dremel your own holes to match to the fenders. In actuallity, it was not as bad as some thought.
The corners bolt right in. "
MaxBoost wrote this in this post:
https://www.honda-acura.net/forums/s...light=maxboost
Was there anything else you had to do MB?
'Till All R one!!
Joined: Mar 2002
Posts: 335
Likes: 0
From: San Diego, CA
Re: Re: 2 door and 4 door...same front bumper?
Originally posted by MaxBoosT
- I used 2/3dr Corners.
- Kept the Sedan fenders.
- Had to redrill holes on bumper.
- Have a strong friend (thanks Don_R6) stretch out bumper to have it match as closely as possible.
- I used 2/3dr Corners.
- Kept the Sedan fenders.
- Had to redrill holes on bumper.
- Have a strong friend (thanks Don_R6) stretch out bumper to have it match as closely as possible.
Administrator ☂
Joined: Jul 2002
Posts: 56,734
Likes: 3
From: NY
Re: Re: Re: 2 door and 4 door...same front bumper?
Originally posted by Sasebonian
Maxboost, you didn't have any gap showing with the 2/3dr corners with your 4dr fender?
Maxboost, you didn't have any gap showing with the 2/3dr corners with your 4dr fender?
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
