Front and rear speakers
#13
I have an Infinity Kappa Component set up in my sol, but its in the front as for the back stay with the stock size 6.5 it will sound fine. Just amp them up and the infinities will sound great. Oh but before you go and buy crutchfield look at justcarspeakers you can find the same stuff for a little cheaper.
#14
Registered User
Join Date: Jun 2003
Location: SoCal, USA!!
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Falkon
that's DEPTH? That means I could easily fit components in there.
that's DEPTH? That means I could easily fit components in there.
#15
Do what must be done.
Join Date: Apr 2003
Location: Fountain Valley, CA
Posts: 1,901
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by lead
Oh but before you go and buy crutchfield look at justcarspeakers you can find the same stuff for a little cheaper.
Oh but before you go and buy crutchfield look at justcarspeakers you can find the same stuff for a little cheaper.
#16
still alive
Thread Starter
Join Date: Sep 2002
Location: Huntsville, AL
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
I buy from high rated ebay sellers. With the spacers, can you still fit the grill panels on? I just want to fit some Infinities back there, but I want to use the stock grill.
#17
Registered User
Join Date: Jun 2003
Location: SoCal, USA!!
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Falkon
I buy from high rated ebay sellers. With the spacers, can you still fit the grill panels on? I just want to fit some Infinities back there, but I want to use the stock grill.
I buy from high rated ebay sellers. With the spacers, can you still fit the grill panels on? I just want to fit some Infinities back there, but I want to use the stock grill.
#20
Registered User
Join Date: Oct 2003
Location: HOUSTON
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
i've got fosgate hpc series fronts and rears 6 3/4" . your infinity's will fit. with slight modification
FRONT- take out plastic speaker bracket on door. just to see if yours fit if not dremel until they do. dynomat , then drill new holes
BACK- a bit trickier, have to take speaker cover and cut out the white dividers on the inside. then set new speaker in bracket
if you get two holes to line up it will work. if not you need to modify the bracket.
its easier than it sounds took me about 3 hours total to figure out/install
with stock grills looks perfect
FRONT- take out plastic speaker bracket on door. just to see if yours fit if not dremel until they do. dynomat , then drill new holes
BACK- a bit trickier, have to take speaker cover and cut out the white dividers on the inside. then set new speaker in bracket
if you get two holes to line up it will work. if not you need to modify the bracket.
its easier than it sounds took me about 3 hours total to figure out/install
with stock grills looks perfect