installing 1 piece 4-1 header any tips?
sancho on the sizzide!
Joined: Aug 2000
Posts: 27,129
Likes: 0
shoe horn it in.
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
Registered User
Joined: May 2003
Posts: 238
Likes: 0
From: minnesota
Originally posted by igo4bmx
first
use good tools to remove the bolts holding on the existing manifold.
second... put it in from underneath
first
use good tools to remove the bolts holding on the existing manifold.
second... put it in from underneath
Honorary Moderator Alumni
Joined: Sep 1999
Posts: 8,735
Likes: 0
From: Someplace with cones=AUTO
I used a Mr Gasket copper seal.
Also helps to take the bracket that held the existing header on underneath the car. It has two bolts to it and goes up by the oil filter'ish (L shape). Taking that off made installing the header easier. Also might help to remove the undertray for the front bumper. And only torque down the bolts to 10ft/lbs. And maybe in a day or two torque them down again.
Also helps to take the bracket that held the existing header on underneath the car. It has two bolts to it and goes up by the oil filter'ish (L shape). Taking that off made installing the header easier. Also might help to remove the undertray for the front bumper. And only torque down the bolts to 10ft/lbs. And maybe in a day or two torque them down again.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
