first you have to get that black column that is infront of the gauge cluster off,..it is held on by 2 screws that are at the top,..and then 2 tabs that are at the bottom,..once that is off,..there are 4 screws holding on the gauge cluster itself,..once you get those 4 screws,..take out the gauge cluster enough to see 2 harnesses connected to the back,..unplug those,..installation of the new cluster is the complete opposite of the removal of the old cluster,...oh and about those 2 tabs i was talking about earlier,..i just broke those and my black column still goes in with a problem,...sorry its kinda a shitty how to but its a fairly simple install,...good luck