I'm new here, so i apologize if this subject's been talked about all to hell.

I have a set of EK9 mirrors with the power folding option that i want to install in my 99 civic coupe. I have:

mirrors
jdm switch
oem relay box
jdm harnesses to plug into mirrors

I tried hooking it all up, but i can't seem to match the proper correlating wires to the jdm switch--they're all different colors.

I also tried using a guide i found online, but it was for a 92-95 model. my main question is: How do i know what oem wires to hook up to the jdm wires on the jdm switch?

i tried just seeing if the power option worked by hooking up the relay to the switch and then running temporary wire to each of the mirrors... but nothing happened. can someone give me a diagram of this process?

and also, what's up with the passenger side mirror on my usdm civic? there're 5 wires--where do the orange/white and black ones come from? there's also a black/blue wire on the OEM switch that isn't run to either mirror--what's that one do?

any help would be much appreciated