Thread: Replacing a Cat
View Single Post
Old May 31, 2003 | 01:29 PM
  #2  
honda guy's Avatar
honda guy
Senior Member
 
Joined: Apr 2003
Posts: 497
Likes: 1
From: nj
Default

there is three nuts on each side of the cat. depending on how rusted they are you may need a torch to heat the nuts but if you are replacing it then you could just cut them off. also if the cat was the cause if bad emisions the second o2 sensor would have indicated a failur dy turning on the check engine lite. It probably isnt the cat the car could be running rich this could make it fail also.
Reply