Ok im preparing to swap a JDM B16A2 into my 1992 civic cx, this will be my first attempt at an engine swap and I have a few questions about the wiring that needs to be done. I've searched the internet and read dozens of posts about wiring issues and its only made me more confused. I'll start off with what I do know. From reading some of the posts from other forums my JDM engine harness is going to be backwards because it was from a right hand driver, now considering that the harness isn't going to work,do I take the harness off my stock cx engine and use that? Also someone was talking about a HASport sub-harness, what does this sub-harness do? I went to HASports' website and it says its for DX/LX models, im hoping it will work for my cx model. Does anyone know if it will? Thats all the info I have about the sub-harness. If anyone has any insight on this I would appreciate all the help I can get. I just need to know should I use my stock cx engine harness, and will the sub-harness save me from having to run my own wiring. Thanks for any help. Remember I have a 1992 civic cx hatchback. Thanks