View Single Post
Old May 15, 2003 | 10:25 PM
  #55  
19.3secS2K's Avatar
19.3secS2K
my bum is on the swedish!
 
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
Default

Originally posted by SleeperCivicEX
Okay you tards, the Y7 is just like the Y8 except for the intake manfiold and VTEC head. Other than that, they're probably the same damn motor.
reading this statement and seeing probably in it shows you don't know what you're talking about.

I own a y7. I've done research on the engine. It is i n fact weaker than the y8. they are NOT the same motor. Don't talk about things you don't know.

I have approx 200whp on my car running 8psi of boost with the Greddy kit, FMIC, and exhaust. Now that I have fuel mods, there's no telling what I can lay down on the dyno. I've been running this setup for almost 2 years now with no problems.

I also know a guy who pushed 302whp and 256ft/lbs with a D16Y8 and stock internals. He just used an aftermarket head gasket. These motors are stronger than everyone thinks, so give the "do a swap" routine a break. You can spend $4k on a swap and I'll spend $2k on a turbo kit and own your ass.
if you weren't a retarded dumbass who didn't read threads through before you posted, then you would have read that:

1) y7s and y8s are not the same
2) he is not using boost
3) he has an auto matched with it

next time you post, post something relivant and intelligent.
Reply