Originally posted by AccordSleeper
why don't you think it would be easier. you have to take out the old shifter and put it back either way.
Because you don't have to remove the shifter if you just cut it down and re-thread it. But I also have never taken a shifter apart so I don't really know if it's all the difficult or not, but I know i'd rather not do it if at all possible.
Originally posted by SumAccordGuy94
I cut my shifter... about 1.5".
You cannot cut the top of the shifter off, the shift shaft is hollow and you WILL NOT be able to re-thread it.
I don't know if they made the shifter hollow on the EX for weight reduction
but on my LX, the shaft is solid:dunno: