Originally posted by dantastic
for those of you who have s/t bars on a 5th gen: is it possible to use the stock harware (i have a ex with facotry f/r bars) to install the bars?? i bought a set, but my brother lost the hardware kit that came with it
Some you can use, but not all since the design of the holes are diff. You can use the old short bolts, washers, Rubber bushings, but not the arm, you'll have to buy a new long bolt for eash side, probably a spacer too. I don't know the size, but you can measure from the holes at each ends of your bar.
VTEC inside Corrected it right, a Heavier and stronger rear sway bar will make you car oversteer and thus easier for FF cars. I noticed that the OEM front bar is still way bigger than the S/T rear though.
I'll check things out tomorrow and inform you guys on th updates.