Originally posted by 96JdmAccord
OK correct me if im wrong. On a Stock 94-97 accord you have 2 bulbs in your corner lights. Im pretty sure one bulb does the blinking and the other bulb stays on. The Real JDM stanley corner lights have one bulb insert. You said you put one bulb in the corner lights. Now I just got a pair of JDM headlights/corner lights. The only bulb/corner plugs that will fit is the the one that stays on all the time. Unless I got some special pair that does not let the blinking bulb/plug fit in it.
So basically you put the blub/plug that stays on fully and left the one that does the blinking out? Am I correct? That is my guess. Im pretty sure it is this cause or the post above.
Jon
Actually the 94-95 corner bulbs is the one where only one blinks and the other stays on. In the 96-97 both stay on. The 96-97 front bumper turn signal is bigger then 94-95 because DOT requires that turn signal be visible from the front and front right side.
You can just swap the sockets by cutting off the socket on the one that blinks and rewire it to fit.