Tips:

1. Make sure bar is on the right way, or when you lower the car it could damage the lower control arm and bend the sway bar.

2. Make sure that the bushing is on correctly or it could make a squeeky weird noise around corners...

3. Put on the endlinks to the sway bar first, then put the mounting and bushing on the sway bar. Trust me on this it'll make things so much easier

4. Make sure all the bolts are on tightly, not super tight, but just tight enough. Or else it'll make banging noises, which at first i thought it was my exhaust hitting the sway bar, but it was really just on the right endlink it needed 2 turns to tighten it a bit more.

Any other tips guys...?