Alright bro, was about to head to bed, but figured I got time to take out the grill and take some pics...

Alright this is a pic of the right side (veiwed from the front of car). Basically the mesh is holding it self up there, I also used the holes in the back piece as kind of support. The left side was done the same.


Here is basically what's supporting the bottom part of the grill. The bottom piece that sticks out from the back and you screw in I left it a little high and cut out a notch of the mesh for clearance.


Here are two pics right and left side of where I used a black twist tie to keep it in for those "just in case" situations, heh. It's that part that connects to the headlights...



And there you have it... that's how it worked for me and when it's on it looks completely fine and doesn't look all loose and stuff... here's a finished product pic... heh


When cutting the mesh it just kinda naturally bended and the curve was perfect for the grill. I cut it a little big so it wouldn't be too small and not fit... since it was too big I could wedge it in there basically... I hope this sheds some light to your conflicts. Let us know how you end up doing it and post some pics!