the real oem lights are waaaay harder to install than the depos.

the instructions i got were actually just the oem honda instructs, shrunk down so they were impossible to read.
-- the fogs mount to the bumper 3 screws and to the body with one bolt.
-- the one red wire with a ring terminal goes to the battery, the black goes to ground.
-- i screwed the relay into a factory bolt location near the air filter. then u run the 2 plugs for the fogs to the front, using the zip ties with anchors to keep them tied down.
-- theres one wire that u run through the driver's side harness grommet.
-- u may need to remove the panel under the steering wheel to get the green plug to the fog switch.
-- u also need to plug the brown plug into the fuse box. u can plug it into any of the available spots on the fuse box. mine is plugged into the parking light one, so they can be turned on as long as my parking lights are on