Originally posted by 01 Tight R
hey what up i have 01 itr and am thinking of turboing it only 7-10 psi do you have any suggestions? I know the compression is high I dont wanna gernade the engine!! I know a metal head gasket will help and a jns knock sensor----any other thoughts...like how you did your oil lines and or water???
I'm running a SCE Copper Head Gasket to lower the compression .093 thou thick which is pretty much a 3mm gasket. You must o-ring the head for it to properly seal.
And then for engine management i highly suggest a hondata S200 system. There must be a authorized hondata tuner in your area to tune it properly. I am safely running 8 psi.
For an oil line you just have to run a steel braided line from your oil pressure sender to the turbo.
For more info check out
www.speedtechracing.com just call the toll free number and ask for allan.