Thread: b16 assembly questions.
View Single Post
Old Mar 18, 2003 | 10:11 AM
  #2  
rev's Avatar
rev
Senior Member
 
Joined: Nov 2002
Posts: 115
Likes: 0
From: Nashville
Default
Oil clearance should be .0009-.0017 on the mains and .0013-.0020 on the rods. Torque the mains to 18# then 58#. Torque rods to 23# and the heads to 49# with an A2 or 62# with an A3 motor in steps. Damper bolt goes to 130#
Reply
0