Originally posted by seth90dx
I have to say that the person who is *****ing is someone who sent larry his block to get it sleeved. Larry DOES NOT sleeve the blocks at his shop. There is alot of reasons why but I wont get into that. He sends them to Golden Eagle and has them resleeve because they haver the proper equipment.
So the folks who are talkin **** at larry should be talkin **** to GEM
If what you wrote above is true, then I have to disagree. If I called up ENDYN and said I wanted to use their 90mm pistons for example (which require sleeves) And Larry, or whoever told me the block would be sleeved with GEM sleeves. And I then sent my motor to ENDYN which in turn sent the block to Golden Eagle for sleeving, ENDYN is fully responsible for anything that goes wrong with the sleeves. Unless it was previously stated that they won't take responsibility for the sleeves. I beleive that if you are subbing out work, because you don't have the equipment (or for whatever reason), you should take responsibility for your subs mistakes and then take it up with the sub later.
Also, I am pretty sure that DART doesn't make H series blocks.