Originally posted by 98r-1144
what i used to do was just use normal screws... and put superglue into the heads of the screw (so you couldn't put a screwdriver inside).
i figured i wouldn't have to change the bulbs for a long time..
and when i finally had to change the bulb, i used a mini mini dremel to drill out the super glue.. prolly took me a good 15-20 min.
That was not an option for me as I knew I would be removing mine every now and then. I like to tinker w/ my car and stuff, so every now and then I will remove my bumper for whatever reason (cleaning or removing headlights, rewiring turn signals, etc). I couldn't find silver Torx screws, but the black ones I have fit pretty deep (more than stock) into my bumper lights, so you can't see them.