RedRexDX,
Yes, it should be possible...the process should be delineated in your shop manual.
I took a look at the clutch MC on the wife's 1996 Civic when I had a minute this morning, but didn't see what I was expecting...so the adjustment might be at the slave cylinder...
See if there is a pushrod in the slave that attaches to the engagement lever on the tranny...if there's no pushrod on the master, you would have to do the adjustment here I'd think.
Ah, there we go, I just looked at the shop manual for her car...the pushrod comes into the cabin...so if you want to mess around with it...that's where to start...
Bogatyr