Originally posted by FourthGenHatch
I built my own Camera Mount and it was incredibly simple and incredibly stiff, there was no shake at all.
All I did was take a 1'' aluminum bar, cut it to about 1.5' drill two holes in it big enough and spaced so that the headrest would go through it, then I drilled one hole for a screw that went into the bottom of the camera. So basically a bar with 3 holes, very simple, and works very well, I can get some pictures tomorrow if you wanna see.
If you go to the above link it's the exact same thing you are talking about
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5%
CRAZY MOJO!
Autocross Help Page