Note: This is the installation of the Acura CL Type-S rear sway on the Accord Coupe; however, the TL Type-S rear sway will fit the Sedan. So for sedan owners, replace the letters CL with TL when you see them -98

You will need:
-1-2 hours
-8/16 socket \ 14mm socket and an ajustable rench
-5mm allen key
-a Cheater bar
-can of WD40
-3 pairs Rubber Gloves (will rip)
- Jack and Jack Stands
Go to the ACURA dealer and ask for a CLS rear sway bar with bushing. You can reuse the bolts.

some tools you'll need


Here is a picture of the stock rear sway bar (top pix) and the CLS sway bar (buttom pix) the little baggies are the busing