Old Dec 28, 2002 | 06:07 AM
  #1  
fallenlordz's Avatar
fallenlordz
Junior Member
 
Joined: Jul 2002
Posts: 8
Likes: 0
Default PLEASE HELP - Distributor problem, car wont start

Can someone please help me with my current problem.. I have a 1992 ACURA integra GS. The problem appeared as I was driving from New York to Atlanta (850 miles)

Once I arrived in atlanta my cheak warning light came on the dashboard. Then i opened my car hood and looked at it, I started hearing sqeaking and banging noise coming from the distributor.

Later I opened the distributor cap and I saw that the rotor was wobbling alittle bit back and forth. So I thoght that was the problem.

I then went to the Acura Dealer and got a new distributor (I does not wobble), I also got a new Rotor and new Cap just to be on the safe side. After I put in the coils and the wires form my old disributor to my new distributor, I then put on rotor and cap, then attached the spark wires.

Here comes problem.. My car will not start when I turn on the ignition key. I hear normal sounds but I dont think there is any spark goin to my engine. ( I also bought new spark plugs and wires to be safe)

CAN ANYONE GIVE ME ANY SUGGESTIONS. (I have to goo back to NY this week) I would bring the car in to the ACURA dealer but the car doesnt start. PLEASE HELP!!!!
Reply