Question:
I found a chart http://members.fortunecity.fr/mcdo/i...da/pin-out.htm
shows each and every pin on the PR3.
Can i take out every pin and just keep the vital ones that will keep the engine running? Can i take out the following pins and try to turn on the car? I know it will probably throw a gazilion codes, but it'll be better than a steady "ON" no blink LED! (bad ecu code).
This could actually get me somewhere.
A8-VTEC Spool Solenoid Valve
B3-A/C Clutch Relay
B5-VTEC Pressure Switch
B8-AC Switch (ACS)
B16-Speed Sensor
B19-Knock Sensor
C5-Intake Air Temp Sensor
C7-TPS Sensor
C8-O2 Sensor
C9- Oil psi switch
C10-Brake switch