Originally posted by jordan88
i have a MTX amp with 12" alpine subs with alpine 7894 deck. The subs were playing fine when i was going to work, and i had the volume up like at 14 volume level, pretty loud. When i was done work, my subs doesn't work anymore, so i first checked the power to amp, it seems there isn't any power to it. Could it be the fuse? there are 2 fuse, one is the one attached to the power lead, other one is on the amp, which one could it be?
also what is the one on the amp for?
Thanks you!!
it could be either one of those fuses, it just depends on how ur system is setup. If you have for example, a two amp setup, the fuse coming off the battery should equal to or a little bit higher than the total amperage of the fuses on both amps. If that's the case, 9 times out of 10, the fuse on the amp would blow before the fuse by the battery. Just make sure to check both fuses, if those are fine, check ur remote lead, u should read 12v on it when the key is in the on position, if u don't, that's ur problem.